How to use Ghost Disk Imaging Program
How to use Ghost Disk Imaging Program
The Ghost program is installed onto your computer from a CD or Pendrive
Creating a file image of a partition
1. Turn off your computer.
2. Insert Ghost CD or Pen drive .
3. Turn on your computer and Goes to BIOS Setup set Boot Drive.
4. When ghost has started click OK.
To Image your Hard Drive
1. Select Local>> Partition, >>to Image and Click.
2. Select source drive. (If you have 2 hard select the one to Image).
3. Click OK.
4. Select the partition you want to image. (Usually primary for drive C: this is where
you operating system is located)
Click one than Click OK.
5. Goto the Drop Down Box at the top of the screen. (You have to select
The place you want to store the image that you are creating. It may be D:
Drive or E: drive if you are imaging the C: drive.
If you want to save the image file on your D: select the D drive from the drop down
box. Type in a name for the file ( C_Drive) and click save.
6. Select the method of compression that you want, None, Fast (60%), or High (50 %).
Select fast and Yes.
7. Click proceeds. A status screen will come up showing information, how fast, file
size and time remaining.
Ghost is now imaging your partition. Wait until you are prompted Dump Completed
Successfully click continue. Click Quit from menu. Click Yes. Remove disk after
you see the Ghost prompt appears. Restart your computer.
You now have an image of your C: partition saved on your computer.
How To Restore a Image File Using Ghost
1. Turn off your computer.
2. Insert the Ghost CD or Pen drive .
3. Turn on your computer.
4. After Ghost starts click OK
5. Select from the menu Local,>> partition>> from image.
6. Click.
7. Select the location of the image file on your hard drive from the drop down
window.
8. Enter license number that can be found on the startup screen when booting from
the CD /PD
9. Click OK
10. Select the drive where the image is stored.
11. Click OK.
12. Select the drive where you want to restore the image to.
13. Click OK.
14. The partition that you want to restore.
15. Click OK.
16. Click yes to restore the partition.
17. After the partition has been restored you remove the floppy disk and press restart
computer.
18. The computer will restart with the restored partition in place. You are now
finished.
The Ghost program is installed onto your computer from a CD or Pendrive
Creating a file image of a partition
1. Turn off your computer.
2. Insert Ghost CD or Pen drive .
3. Turn on your computer and Goes to BIOS Setup set Boot Drive.
4. When ghost has started click OK.
To Image your Hard Drive
1. Select Local>> Partition, >>to Image and Click.
2. Select source drive. (If you have 2 hard select the one to Image).
3. Click OK.
4. Select the partition you want to image. (Usually primary for drive C: this is where
you operating system is located)
Click one than Click OK.
5. Goto the Drop Down Box at the top of the screen. (You have to select
The place you want to store the image that you are creating. It may be D:
Drive or E: drive if you are imaging the C: drive.
If you want to save the image file on your D: select the D drive from the drop down
box. Type in a name for the file ( C_Drive) and click save.
6. Select the method of compression that you want, None, Fast (60%), or High (50 %).
Select fast and Yes.
7. Click proceeds. A status screen will come up showing information, how fast, file
size and time remaining.
Ghost is now imaging your partition. Wait until you are prompted Dump Completed
Successfully click continue. Click Quit from menu. Click Yes. Remove disk after
you see the Ghost prompt appears. Restart your computer.
You now have an image of your C: partition saved on your computer.
How To Restore a Image File Using Ghost
1. Turn off your computer.
2. Insert the Ghost CD or Pen drive .
3. Turn on your computer.
4. After Ghost starts click OK
5. Select from the menu Local,>> partition>> from image.
6. Click.
7. Select the location of the image file on your hard drive from the drop down
window.
8. Enter license number that can be found on the startup screen when booting from
the CD /PD
9. Click OK
10. Select the drive where the image is stored.
11. Click OK.
12. Select the drive where you want to restore the image to.
13. Click OK.
14. The partition that you want to restore.
15. Click OK.
16. Click yes to restore the partition.
17. After the partition has been restored you remove the floppy disk and press restart
computer.
18. The computer will restart with the restored partition in place. You are now
finished.
Post a Comment