Motherboard Issues Problems (कम्प्युटर मै Motherboard से क्या - क्या प्रोब्लेम होती है ओर उन्हे कैसे सही करे )
Motherboard Issues Problems (कम्प्युटर मै Motherboard से क्या - क्या प्रोब्लेम होती है ओर उन्हे कैसे सही करे )
Symptoms: 1. Computer is Total Dead (Computer Don’t Start)
Solutions:
1-first open System, check front panel jumper. it should be proper connect to MB. And also check ON/OFF switch.
2-Check SMPS by Shorting Green with black. Fan move means ok otherwise faulty.
3-Clear the CMOS/BIOS by removing cmos battry and cmos-clear jumper
4-remove all device from motherboard and clean by IP/White petrol.
5-after that same problem means require a repair/Replace Motherboard.
Symptoms: 2. Computer start but no display
Solutions:
1-First Remove RAM from Slot, clean RAM pins by Eraser and clean Slot, then insert and check.
2-Same Problem, Then insert New RAM if display come, replace RAM. 4-Reconnect 4 ATX Power Connector.
3- Clear the CMOS/BIOS by removing cmos battery and cmos-clear jumper.
4- Remove Processor, Clear the Microprocessor Socket and Processor and reinsert.
5-Remove all device from motherboard and clean by IP/White petrol.
6-after that same problem means require a repair/Replace Motherboard
Symptoms: 3. Computer start Slow
or
Hanging
or
Restart again and again and slow working
Solutions:
1-First open cpu clean cpu fan dusting and put new cooling paste on mp.
2-remove RAM, clean RAM Pins by Eraser and also clean RAM Slot by brush.
3- Reinstall window
4-but Same Problem then put the figure on IC’s and Chip’s, it may any one IC’s and Chip’s Excess Heat.
5-Remove all device from motherboard and clean by IP/White petrol.
6-after that same problem means require a repair/Replace Motherboard
Symptoms: 1. Computer is Total Dead (Computer Don’t Start)
Solutions:
1-first open System, check front panel jumper. it should be proper connect to MB. And also check ON/OFF switch.
2-Check SMPS by Shorting Green with black. Fan move means ok otherwise faulty.
3-Clear the CMOS/BIOS by removing cmos battry and cmos-clear jumper
4-remove all device from motherboard and clean by IP/White petrol.
5-after that same problem means require a repair/Replace Motherboard.
Symptoms: 2. Computer start but no display
Solutions:
1-First Remove RAM from Slot, clean RAM pins by Eraser and clean Slot, then insert and check.
2-Same Problem, Then insert New RAM if display come, replace RAM. 4-Reconnect 4 ATX Power Connector.
3- Clear the CMOS/BIOS by removing cmos battery and cmos-clear jumper.
4- Remove Processor, Clear the Microprocessor Socket and Processor and reinsert.
5-Remove all device from motherboard and clean by IP/White petrol.
6-after that same problem means require a repair/Replace Motherboard
Symptoms: 3. Computer start Slow
or
Hanging
or
Restart again and again and slow working
Solutions:
1-First open cpu clean cpu fan dusting and put new cooling paste on mp.
2-remove RAM, clean RAM Pins by Eraser and also clean RAM Slot by brush.
3- Reinstall window
4-but Same Problem then put the figure on IC’s and Chip’s, it may any one IC’s and Chip’s Excess Heat.
5-Remove all device from motherboard and clean by IP/White petrol.
6-after that same problem means require a repair/Replace Motherboard
*****************Best of Luck******************
Bablu Patel
e-mail:bablupatel75@gmail.com
FB:www.facebook.com/bablup3
Blogger: bablunotes.blogspot.in
https://twitter.com/Bablu788
https://in.linkedin.com/in/bablu-patel-ba117038 https://plus.google.com/u/0/+BabluPatel
Post a Comment